采用信道估计法的基站VSWR实时检测

为解决无线基站宽带工作频带内电压驻波比(Voltage Standing Wave Ratio,VSWR)的实时测量，提出了一种采用信道估计法的测量方案。该方案实现简单，在基带处理单元高速率位置发送数据，依次抓取射频通道反馈和反射数据，分别求取信道响应序列，结合工厂装备测试数据，计算驻波反射系数和反射点位置。发送信号采用宽带正交频分复用信号，能检测到工作频段内任何频点处的驻波异常。有用信号前加循环前缀，并引入峰值抵消核，能正确检测到多个反射点驻波。仿真结果表明，该方案驻波测量精度和单回波点位置精度达到预期，多回波点测量能抓准外部主要故障点，在基站VSWR实时测量中具有良好的应用前景。     

Living Materials Herald a New Era in Soft Robotics

Living beings have an unsurpassed range of ways to manipulate objects and interact with them. They can make autonomous decisions and can heal themselves. So far, a conventional robot cannot mimic this complexity even remotely. Classical robots are often used to help with lifting and gripping and thus to alleviate the effects of menial tasks. Sensors can render robots responsive, and artificial intelligence aims at enabling autonomous responses. Inanimate soft robots are a step in this direction, but it will only be in combination with living systems that full complexity will be achievable. The field of biohybrid soft robotics provides entirely new concepts to address current challenges, for example the ability to self‐heal, enable a soft touch, or to show situational versatility. Therefore, “living materials” are at the heart of this review. Similarly to biological taxonomy, there is a recent effort for taxonomy of biohybrid soft robotics. Here, an expansion is proposed to take into account not only function and origin of biohybrid soft robotic components, but also the materials. This materials taxonomy key demonstrates visually that materials science will drive the development of the field of soft biohybrid robotics.     

水平方向上的大气透过率和热辐射计算模型研究

水平方向上的空气对流和复杂的地面状况会导致大气热辐射计算的不确定度增大，目标发射起始段的红外辐射特性测量有助于实现目标识别。因此，研究水平大气透过率和热辐射对目标的高精度红外辐射特性测量具有十分重要的意义。针对以上问题，首先借鉴垂直廓线理论建立了同层大气“水平温度廓线”模型，然后推导了水平方向计算大气透过率和热辐射的公式，并对其进行了实验验证。最后将MODTRAN软件计算和实验测量的大气热辐射结果进行了比较。实验结果表明，传统软件的热辐射计算精度为8.65% ，而本文方法的计算精度为4.91%。该实验说明，在水平方向上，这种算法是正确的。通过公式推导和实验验证说明了该方法的合理性，为水平方向大气透过率和热辐射的计算提供了一种新的思路。     

上海市火力发电行业能源计量现状分析

能源计量与节能监测、能源审计、能源统计、能源利用状况分析是用能单位能源管理和节能工作的基础。通过对本市部分火力发电企业的现场调研，针对性地提出改进建议，以期帮助用能单位增强能源计量在节能减排工作中的有效性。     

建筑室内氡检测的方法探讨

通过对建筑室内氡检测方法的研究,对原国标氡检测方法进行了比较分析,对新出现的测氡方法进行了考核比较,提出了4种适用的室内氡检测方法,并对现场使用提出了要求。     

补偿强反光体表面红外测温误差的算法研究

针对运动强反光体表面温度实时测量困难、精度低这一难点,本文从红外测温原理入手,分析并揭示了红外测温精度易受到被测物体反射率、测量距离、测量环境、红外入射角等因素的影响。根据铝板材加工设备轧辊表面测温实际需要设计了一种利用红外传感器实现对强反光体表面温度点对点测量的方案。通过对测量数据的研究分析建立了一种基于斯忒藩定律的红外入射角度补偿算法,以此减小因红外入射角度变化产生的测温误差。实验结果证明本方法能较好地弥补红外入射角度变化产生的测温误差,提高测温精度。该补偿算法运算简单,适应性强,为改善入射角度变化对测温精度影响提供了新的方法。     

An improved two-colour pyrometer based method for measuring dynamic temperature mapping of hydrogen-air combustion

To solve the problem of measuring the combustion temperature of hydrogen gas, an improved two-colour pyrometer with suspended tungsten powder was developed and calibrated by a tungsten halogen lamp. The characteristic temperature parameters of the premixed 30% H₂/70% air flame, including temperature distribution, proportion, maximum value, minimum value, and average value, could be measured and calculated using the improved two-colour pyrometer method and a python code. The temperature measuring results of H₂-air mixture obtained by this technique were compared with that of thermocouples and previous studies. The results verified its feasibility to measure the flame temperature structure of H₂ combustion. Future work concerning the influential factors of the improved two-colour pyrometer was also mentioned.     

软土地基的真空预压+水载法处理施工技术

结合横琴国际商务中心(二期)项目中的软土地基处理实践,介绍了真空预压+水载法施工技术。从真空预压加速固结、设置水泥土搅拌桩形成密封墙等方面出发,对关键工艺进行了阐述。真空预压+水载法施工技术实施后,项目取得了良好的社会效益和经济效益,可供相关工程参考。     

Dual-mode optical thermometry based on Bi3+/Eu3+ co-activated BaGd2O4 phosphor with high sensitivity and signal discriminability

A series of BaGd₂O₄:Bi³⁺,Eu³⁺ phosphors with dual-emitting centers were prepared by high-temperature solid-state method. X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), fluorescence spectroscopy, lifetime decay curve and variable temperature emission spectroscopy were used to systematically study the structure, luminescence performance and temperature characteristics. Under ultraviolet (UV) excitation, the BaGd₂O₄:Bi³⁺,Eu³⁺ phosphor showed a broad-band emission in the blue region corresponding to transitions of Bi³⁺ ions and the sharp red light emission corresponding to Eu³⁺ ions. The Bi³⁺ and Eu³⁺ ion emission peaks were well-separated, which meets a prerequisite for efficient temperature signal resolution measurement. The fluorescence intensity ratio (FIR) technique was used to measure the different temperature response characteristics between Bi³⁺ blue emission and Eu³⁺ red emission. When the temperature varies from 293 K to 473 K, the relative temperature sensitivity (S_r) of BaGd₂O₄:Bi³⁺,Eu³⁺ phosphors is obtained, was determined as 1.0182%K⁻¹. In addition to calculating the relative sensitivity by FIR technology, we can also obtain the value of S_r through experiments and formulas related to the decay life, and found to be 1.0651%K⁻¹. Therefore, BaGd₂O₄: Bi³⁺,Eu³⁺ phosphor is an excellent non-contact optical temperature measurement material.